Double Sided PET Tape Jumbo Roll
- Size: 1020 mm, 1240 mm, 1260 mm jumbo roll width available
- Color: clear / transparent adhesive layer
- Carrier: clear PET film with stable thickness control
- Adhesive: acrylic PSA coated on both sides
- Liner: red MOPP, PET liner, or yellow glassine liner
- Use: glass, acrylic, PC panels, nameplates, and clear parts
Two Side Tape Company is a manufacturer of Double Sided PET Tape Jumbo Roll for transparent bonding of glass, acrylic, PC panels, nameplates, and clear industrial materials. This tape uses a clear PET carrier with acrylic pressure-sensitive adhesive on both sides, giving converters a stable roll structure for slitting, die cutting, laminating, and panel assembly. It is designed for clean bonding where clarity, low residue observation, liner peel stability, and neat die-cut edges are important.
Product Production
Product Overview
This clear PET carrier tape is made for applications where the adhesive layer must stay thin, flat, and visually clean after bonding. The PET film core helps control adhesive thickness, reduce stretch during slitting, and keep the bond line flatter than unsupported adhesive film. For transparent parts, the tape is selected not only for peel strength but also for clarity, edge appearance, haze control, and reduced visible adhesive marks after lamination.
As a double coated polyester tape, it combines a transparent PET carrier, acrylic adhesive on both sides, and a stable release liner for jumbo roll converting. The material can be supplied for rewinding, narrow-width slitting, kiss cutting, rotary die cutting, and panel-size adhesive parts. For glass, acrylic, and PC panel bonding, the surface should be clean and dry before lamination so the adhesive can wet out evenly and reduce trapped air.
Benefits
- – Transparent double sided PET tape helps keep the bond line less visible on glass, acrylic, and PC surfaces.
- – The PET carrier improves dimensional stability during slitting, laminating, and die-cutting work.
- – The acrylic adhesive PET tape structure supports controlled peel strength and stable holding after 24-72h dwell.
- – Stable liner release helps reduce adhesive pick-off, liner tearing, and premature lifting during matrix stripping.
- – Clean die-cut edges help reduce adhesive ooze, stringing, burrs, and small-part deformation under proper tool clearance.
- – Low-residue observation can be checked after controlled removal or rework testing on selected surfaces.
- – Clear bonding areas can be inspected for bubbles, whitening, edge haze, adhesive marks, and edge lifting before mass production.
What should be checked before die-cutting transparent PET double sided tape for nameplates and panels?
Before die-cutting transparent PET double sided tape, the PET carrier thickness, adhesive coat weight, liner release force, and roll tension should be checked together. For die cut PET adhesive tape parts, the edge should stay clean after kiss cutting, rotary die cutting, liner removal, and matrix stripping. A release liner that is too tight may deform narrow strips or small frame parts, while a liner that peels too easily may cause pre-release during storage, slitting, or automatic placement. A 24-72h sample check is useful for transparent nameplates, acrylic windows, PC covers, and panel frames where adhesive stringing, ooze, or small-part lifting can affect assembly quality.
Loading Container
TDS
Item Typical Value
Product Structure Clear PET carrier coated on both sides with acrylic pressure-sensitive adhesive
Total Thickness 80-205 um
PET Carrier Thickness 12-50 um
Adhesive Type Solvent acrylic PSA or modified acrylic PSA
Tape Color Clear / transparent
Release Liner Red MOPP film, PET liner, or yellow glassine liner
Jumbo Roll Width 1020 mm, 1240 mm, 1260 mm, or custom converting width
Roll Length 500 m, 1000 m, 3000 m, or custom length
180-degree Peel Adhesion Typical value tested on glass, acrylic, PC, PET, and stainless steel after 24h dwell
Static Shear Stable holding for panel, nameplate, and transparent part assembly
Liner Release Force Stable peel for slitting, die cutting, matrix stripping, and hand assembly
Bubble Observation 24-72h dwell check after lamination on glass, acrylic, and PC panels
Low Residue Observation Checked after controlled removal or rework testing on selected surfaces
Die-Cut Edge Condition Clean edge, low adhesive ooze, low stringing under proper tool clearance
Temperature Resistance Typical long-term 80-120 C, short-term 120-150 C depending on grade
Width Tolerance +/-0.5 mm for slit rolls, tighter tolerance available after sample confirmation
Storage Condition 20-30 C, dry indoor storage, avoid direct sunlight and heavy roll pressure
Applications
- – Glass panel bonding where a thin, clear, and less visible adhesive layer is required.
- – Acrylic display panel mounting with controlled bubble, haze, and edge-mark observation.
- – PC cover assembly and transparent window bonding for electronic and control-panel parts.
- – Nameplate, graphic overlay, and decorative trim backing that requires clean die-cut edges.
- – Display lens attachment and clear decorative part bonding where adhesive marks and edge whitening must be checked.
- – Die-cut adhesive parts for panel frames, clear overlays, and transparent assembly components.
How can bubbles and visible adhesive marks be reduced when bonding glass, acrylic, or PC panels?
Bubble control depends on surface condition, lamination direction, roller pressure, and the dwell behavior of the adhesive on glass, acrylic, or PC panels. The surface should be clean, dry, and free from fingerprints, cutting oil, dust, plastic powder, and coating residue before the tape is laminated. For transparent parts, one-direction lamination with steady roller pressure helps the adhesive wet out the surface evenly and reduces trapped air near edges, holes, and printed borders. After bonding, a 24-72h observation helps check bubbles, whitening, edge haze, adhesive marks, and low-residue performance. Sample validation is recommended before mass production because PC, acrylic, printed borders, hard-coated surfaces, and molded parts may react differently to the same adhesive structure.
FAQ
Can Double Sided PET Tape Jumbo Roll be used for acrylic and PC panel bonding?
Yes. It is suitable for acrylic and PC panels when the surface is clean, dry, and tested for bubble, haze, and edge lifting after lamination.
Is this tape suitable for die-cut parts?
Yes. The PET carrier and stable release liner support kiss cutting, rotary die cutting, and matrix stripping for panel and nameplate parts.
Will the tape leave residue after removal?
Low-residue performance should be checked by sample testing. Surface coating, dwell time, temperature, and removal angle can affect the final result.
Which liner should be selected for transparent bonding projects?
Red MOPP, PET liner, and yellow glassine liner can be selected according to release force, die-cutting method, and hand or automatic assembly needs.
