No products were found matching your selection.
Other Related Products
-
- Common Size: 15cm x 5m, 15cm x 10m
- Color: Green or dark green
- Backing: Non-woven fabric
- Adhesive: Pressure sensitive hot melt adhesive
- Liner: PE release liner or release paper
- Main Use: Small turf joining and quick repair
-
- Common thickness: 2 mm, 3 mm, 5 mm, 8 mm, 10 mm
- Common width: 8 mm-50 mm, slit rolls or cut-to-length strips
- Color: black, white, grey, or custom color
- Material: soft PU foam rubber, 20-45 kg/m3 typical density
- Adhesive: plain strip or single-side acrylic PSA/rubber PSA
- Use: door, window, cabinet, and light equipment sealing
-
- Common Sizes: 3 mm, 5 mm, 6 mm, 10 mm thickness
- Color: Black, gray, or white
- Material: PE, EPDM, NBR/PVC, or PU foam
- Adhesive: Single-sided PSA with release liner
- Roll Format: 10-100 mm width, 5-20 m length
- Uses: Duct, flange, cabinet, and pipe insulation sealing
-
- Material: Cellular EPDM sponge rubber
- Cell structure: Closed-cell or semi-closed-cell
- Color: Black typical
- Thickness: 1 mm-20 mm typical
- Density: 80-240 kg/m3 typical
- Format: Rolls, slit strips, adhesive-backed tape, die-cut gaskets
-
- Regular Size: 20mm, 30mm, 50mm width
- Color: Clear transparent
- Material: PU gel or acrylic gel
- Thickness: 0.5mm-3.0mm
- Supply Form: Roll, strip, pad, sheet
- Custom Option: OEM die-cut shape
-
EPDM foam rubber density is a controlled material measurement, not a stand-alone promise of sealing or cushioning performance. For cellular EPDM supplied as plain foam, slit strip, adhesive-backed tape, or converted gasket material, the value is meaningful only when specimen definition, thickness condition, cell structure, and conditioning are known. A typical range for current EPDM grades is 80-240 kg/m3. Final acceptance should use the tested grade and representative samples.0
-
- Common thickness: 0.8 mm, 1.1 mm, 1.5 mm, 2.0 mm
- Color: Black or dark gray foam
- Material: Acrylic foam with automotive PSA
- Liner: Red PE film liner or release film
- Tolerance: Width tolerance +/-0.3 mm typical
- Use surface: Painted panels, ABS, PP molding backs
-
- Material: NBR/PVC rubber foam carrier
- Adhesive: One-side pressure-sensitive adhesive
- Structure: Foam backing with release liner
- Colors: Black, gray, white
- Thickness: 1 mm – 10 mm typical
- Format: Slit rolls, strips, die-cut pads
