No products were found matching your selection.
Other Related Products
-
- Material: Cellular EPDM sponge rubber
- Cell structure: Closed-cell or semi-closed-cell
- Color: Black typical
- Thickness: 1 mm-20 mm typical
- Density: 80-240 kg/m3 typical
- Format: Rolls, slit strips, adhesive-backed tape, die-cut gaskets
-
EPDM foam rubber density is a controlled material measurement, not a stand-alone promise of sealing or cushioning performance. For cellular EPDM supplied as plain foam, slit strip, adhesive-backed tape, or converted gasket material, the value is meaningful only when specimen definition, thickness condition, cell structure, and conditioning are known. A typical range for current EPDM grades is 80-240 kg/m3. Final acceptance should use the tested grade and representative samples.0
-
The tensile strength of mounting tape shows how a defined tape specimen resists pulling force before rupture under stated conditions. Read it with carrier construction, specimen direction, width, test speed, conditioning, and elongation. It is not a direct load-capacity rating and is not interchangeable with peel adhesion, shear holding power, or bonded-joint tensile strength. Grade-specific values and real assemblies should be confirmed by representative sample testing before full use.
-
- Common thickness: 2 mm, 3 mm, 5 mm, 8 mm, 10 mm
- Common width: 8 mm-50 mm, slit rolls or cut-to-length strips
- Color: black, white, grey, or custom color
- Material: soft PU foam rubber, 20-45 kg/m3 typical density
- Adhesive: plain strip or single-side acrylic PSA/rubber PSA
- Use: door, window, cabinet, and light equipment sealing
-
- Material: NBR/PVC rubber foam carrier
- Adhesive: One-side pressure-sensitive adhesive
- Structure: Foam backing with release liner
- Colors: Black, gray, white
- Thickness: 1 mm – 10 mm typical
- Format: Slit rolls, strips, die-cut pads
-
- Standard Size: 2 cm x 10 m roll, easy to handle
- Color: Transparent, blends discreetly with clothing
- Material: Hypoallergenic medical-grade adhesive
- Thickness: 0.15 mm (verified in factory quality checks)
- Sweat Resistance: Holds for up to 4 hours even under mild perspiration
- Application: Ideal for quick garment adjustments like necklines, sleeve edges, and dress slips
-
- Carrier: Stable PET film carrier for clean converting
- Adhesive: Pressure sensitive acrylic adhesive
- Color: Clear, translucent, black, or custom backing
- Thickness: 50 um, 80 um, 100 um, 125 um, 150 um, 205 um
- Liner: Red MOPP film, glassine paper, or white release paper
- Format: Jumbo roll, slit roll, log roll, kiss-cut, or die-cut parts
-
- Common Width: 25 mm, 38 mm, 50 mm
- Roll Length: 10 m, 20 m, 30 m
- Backing: Aluminum foil or glass cloth
- Adhesive: Silicone pressure-sensitive adhesive
- Color: Silver, black, gray
- Use Area: Grill lid, door, seams
-
- Common Size: 1020mm, 1040mm, 1240mm jumbo rolls; slit widths available
- Color: Translucent white tissue with yellow or white release paper
- Material: Non-woven tissue carrier with hot melt rubber PSA
- Thickness: Typical 80um-160um, adjusted by bonding surface
- Liner: Glassine paper or release paper for stable unwinding
- Applications: Packaging, paper converting, leather, footwear, foam lamination
