No products were found matching your selection.
Other Related Products
-
- Common Size: 1020mm, 1040mm, 1240mm jumbo rolls; slit widths available
- Color: Translucent white tissue with yellow or white release paper
- Material: Non-woven tissue carrier with hot melt rubber PSA
- Thickness: Typical 80um-160um, adjusted by bonding surface
- Liner: Glassine paper or release paper for stable unwinding
- Applications: Packaging, paper converting, leather, footwear, foam lamination
-
- Common size: 48mm x 25m, 50mm x 30m
- Color: white or light yellow
- Carrier: cloth or reinforced fabric
- Adhesive: pressure-sensitive rubber or acrylic
- Liner: easy-release paper liner
- Use: no-heat carpet fixing and joining
-
- Common Width: 25 mm, 38 mm, 50 mm
- Roll Length: 10 m, 20 m, 30 m
- Backing: Aluminum foil or glass cloth
- Adhesive: Silicone pressure-sensitive adhesive
- Color: Silver, black, gray
- Use Area: Grill lid, door, seams
-
Double sided tape for signage can create a concealed bond line for sign panels, nameplates, acrylic displays, metal plates, and outdoor display assemblies. The key decision is not simply adhesive strength: surface type, coating condition, panel weight, bond area, temperature, humidity, sunlight exposure, application pressure, and dwell all affect the result. Foam mounting tape is often evaluated for rigid panels with minor surface mismatch, while thin film-carrier tape can suit flatter, low-profile parts. If clean removal or a sensitive finish matters, removal behavior must be part of the trial rather than assumed from the tape type. Critical outdoor or unfamiliar substrates should be sample-tested before full use.
-
- Common sizes: 50 mm, 75 mm, 100 mm; custom slit rolls
- Color: Clear, white, or light amber
- Structure: Thin film carrier with pressure-sensitive adhesive
- Thickness: Low-profile 0.15 mm-0.35 mm options
- Grades: Temporary grade and stronger holding grade
- Use: Modular carpet tiles, offices, exhibitions, rental spaces
-
The tensile strength of mounting tape shows how a defined tape specimen resists pulling force before rupture under stated conditions. Read it with carrier construction, specimen direction, width, test speed, conditioning, and elongation. It is not a direct load-capacity rating and is not interchangeable with peel adhesion, shear holding power, or bonded-joint tensile strength. Grade-specific values and real assemblies should be confirmed by representative sample testing before full use.
-
EPDM foam rubber density is a controlled material measurement, not a stand-alone promise of sealing or cushioning performance. For cellular EPDM supplied as plain foam, slit strip, adhesive-backed tape, or converted gasket material, the value is meaningful only when specimen definition, thickness condition, cell structure, and conditioning are known. A typical range for current EPDM grades is 80-240 kg/m3. Final acceptance should use the tested grade and representative samples.0
-
- Common thickness: 0.8 mm, 1.1 mm, 1.5 mm, 2.0 mm
- Color: Black or dark gray foam
- Material: Acrylic foam with automotive PSA
- Liner: Red PE film liner or release film
- Tolerance: Width tolerance +/-0.3 mm typical
- Use surface: Painted panels, ABS, PP molding backs
-
- Common Sizes: 3 mm, 5 mm, 6 mm, 10 mm thickness
- Color: Black, gray, or white
- Material: PE, EPDM, NBR/PVC, or PU foam
- Adhesive: Single-sided PSA with release liner
- Roll Format: 10-100 mm width, 5-20 m length
- Uses: Duct, flange, cabinet, and pipe insulation sealing
