No products were found matching your selection.
Other Related Products
-
- Common thickness:1 mm – 10 mm
- Color options:White, grey, black, custom
- Foam material:Closed cell polyethylene foam
- Adhesive side:Single-side PSA backing
- Formats:Rolls, strips, sheets, die-cut gaskets
- Typical use:HVAC, panels, frames, covers
-
- Material: Closed cell neoprene foam with pressure-sensitive adhesive
- Color: Standard black
- Thickness: Common 2 mm, 3 mm, 5 mm, 8 mm, 10 mm
- Width: Narrow slit rolls or wider sealing rolls
- Structure: Adhesive backed roll with removable release liner
- Use: HVAC panels, enclosure doors, equipment covers, outdoor cabinets
-
The tensile strength of mounting tape shows how a defined tape specimen resists pulling force before rupture under stated conditions. Read it with carrier construction, specimen direction, width, test speed, conditioning, and elongation. It is not a direct load-capacity rating and is not interchangeable with peel adhesion, shear holding power, or bonded-joint tensile strength. Grade-specific values and real assemblies should be confirmed by representative sample testing before full use.
-
- Material: Cellular EPDM sponge rubber
- Cell structure: Closed-cell or semi-closed-cell
- Color: Black typical
- Thickness: 1 mm-20 mm typical
- Density: 80-240 kg/m3 typical
- Format: Rolls, slit strips, adhesive-backed tape, die-cut gaskets
-
- Common Thickness: 0.8 mm-6.0 mm, custom thickness available
- Color: Black, grey, white, or project-specific color
- Foam Material: PU, PE, EPDM, or blended automotive foam
- Adhesive: Single-sided low odor acrylic PSA, 40-80 um typical
- Format: Rolls, strips, kiss-cut parts, and die-cut foam gaskets
- Main Use: Headlights, door panels, dashboards, speakers, HVAC vents, and NVH sealing
-
- Material: NBR/PVC rubber foam carrier
- Adhesive: One-side pressure-sensitive adhesive
- Structure: Foam backing with release liner
- Colors: Black, gray, white
- Thickness: 1 mm – 10 mm typical
- Format: Slit rolls, strips, die-cut pads
-
Double sided tape for signage can create a concealed bond line for sign panels, nameplates, acrylic displays, metal plates, and outdoor display assemblies. The key decision is not simply adhesive strength: surface type, coating condition, panel weight, bond area, temperature, humidity, sunlight exposure, application pressure, and dwell all affect the result. Foam mounting tape is often evaluated for rigid panels with minor surface mismatch, while thin film-carrier tape can suit flatter, low-profile parts. If clean removal or a sensitive finish matters, removal behavior must be part of the trial rather than assumed from the tape type. Critical outdoor or unfamiliar substrates should be sample-tested before full use.
-
- Common thickness: 0.8 mm, 1.1 mm, 1.5 mm, 2.0 mm
- Color: Black or dark gray foam
- Material: Acrylic foam with automotive PSA
- Liner: Red PE film liner or release film
- Tolerance: Width tolerance +/-0.3 mm typical
- Use surface: Painted panels, ABS, PP molding backs
-
- Common sizes: 50 mm, 75 mm, 100 mm; custom slit rolls
- Color: Clear, white, or light amber
- Structure: Thin film carrier with pressure-sensitive adhesive
- Thickness: Low-profile 0.15 mm-0.35 mm options
- Grades: Temporary grade and stronger holding grade
- Use: Modular carpet tiles, offices, exhibitions, rental spaces
