No products were found matching your selection.
Other Related Products
-
EPDM foam rubber density is a controlled material measurement, not a stand-alone promise of sealing or cushioning performance. For cellular EPDM supplied as plain foam, slit strip, adhesive-backed tape, or converted gasket material, the value is meaningful only when specimen definition, thickness condition, cell structure, and conditioning are known. A typical range for current EPDM grades is 80-240 kg/m3. Final acceptance should use the tested grade and representative samples.0
-
- Material: Closed cell neoprene foam with pressure-sensitive adhesive
- Color: Standard black
- Thickness: Common 2 mm, 3 mm, 5 mm, 8 mm, 10 mm
- Width: Narrow slit rolls or wider sealing rolls
- Structure: Adhesive backed roll with removable release liner
- Use: HVAC panels, enclosure doors, equipment covers, outdoor cabinets
-
- Common sizes: 6 mm-600 mm slit rolls, die-cut pads available
- Color: Dark gray or black foam with red PE release liner
- Material: Pressure-sensitive acrylic adhesive and acrylic foam core
- Thickness options: 0.25 mm-3.0 mm for different bonding gaps
- Liner: Red PE film, 100-140 um typical thickness
- Applications: Industrial mounting, assembly, metal/plastic/glass bonding
-
- Common Size: 15cm x 5m, 15cm x 10m
- Color: Green or dark green
- Backing: Non-woven fabric
- Adhesive: Pressure sensitive hot melt adhesive
- Liner: PE release liner or release paper
- Main Use: Small turf joining and quick repair
-
- Common Thickness: 0.8 mm-6.0 mm, custom thickness available
- Color: Black, grey, white, or project-specific color
- Foam Material: PU, PE, EPDM, or blended automotive foam
- Adhesive: Single-sided low odor acrylic PSA, 40-80 um typical
- Format: Rolls, strips, kiss-cut parts, and die-cut foam gaskets
- Main Use: Headlights, door panels, dashboards, speakers, HVAC vents, and NVH sealing
-
- Material: Cellular EPDM sponge rubber
- Cell structure: Closed-cell or semi-closed-cell
- Color: Black typical
- Thickness: 1 mm-20 mm typical
- Density: 80-240 kg/m3 typical
- Format: Rolls, slit strips, adhesive-backed tape, die-cut gaskets
-
- Common Sizes: 3 mm, 5 mm, 6 mm, 10 mm thickness
- Color: Black, gray, or white
- Material: PE, EPDM, NBR/PVC, or PU foam
- Adhesive: Single-sided PSA with release liner
- Roll Format: 10-100 mm width, 5-20 m length
- Uses: Duct, flange, cabinet, and pipe insulation sealing
-
Double sided tape for signage can create a concealed bond line for sign panels, nameplates, acrylic displays, metal plates, and outdoor display assemblies. The key decision is not simply adhesive strength: surface type, coating condition, panel weight, bond area, temperature, humidity, sunlight exposure, application pressure, and dwell all affect the result. Foam mounting tape is often evaluated for rigid panels with minor surface mismatch, while thin film-carrier tape can suit flatter, low-profile parts. If clean removal or a sensitive finish matters, removal behavior must be part of the trial rather than assumed from the tape type. Critical outdoor or unfamiliar substrates should be sample-tested before full use.
