No products were found matching your selection.

Other Related Products

  • Foam Tapes For HVAC

    • Common Sizes: 3 mm, 5 mm, 6 mm, 10 mm thickness
    • Color: Black, gray, or white
    • Material: PE, EPDM, NBR/PVC, or PU foam
    • Adhesive: Single-sided PSA with release liner
    • Roll Format: 10-100 mm width, 5-20 m length
    • Uses: Duct, flange, cabinet, and pipe insulation sealing
    Read moreDone

  • Double Sided PET Tape Jumbo Roll

    •  Size: 1020 mm, 1240 mm, 1260 mm jumbo roll width available
    •  Color: clear / transparent adhesive layer
    •  Carrier: clear PET film with stable thickness control
    •  Adhesive: acrylic PSA coated on both sides
    •  Liner: red MOPP, PET liner, or yellow glassine liner
    •  Use: glass, acrylic, PC panels, nameplates, and clear parts
    Read moreDone

  • Self Adhesive Tape For Artificial Grass

    • Common Size: 15cm x 5m, 15cm x 10m
    • Color: Green or dark green
    • Backing: Non-woven fabric
    • Adhesive: Pressure sensitive hot melt adhesive
    • Liner: PE release liner or release paper
    • Main Use: Small turf joining and quick repair
    Read moreDone

  • EPDM Foam Rubber Density and Test Data

    EPDM foam rubber density is a controlled material measurement, not a stand-alone promise of sealing or cushioning performance. For cellular EPDM supplied as plain foam, slit strip, adhesive-backed tape, or converted gasket material, the value is meaningful only when specimen definition, thickness condition, cell structure, and conditioning are known. A typical range for current EPDM grades is 80-240 kg/m3. Final acceptance should use the tested grade and representative samples.0

    Read moreDone

  • NBR Tape

    • Material: NBR/PVC rubber foam carrier
    • Adhesive: One-side pressure-sensitive adhesive
    • Structure: Foam backing with release liner
    • Colors: Black, gray, white
    • Thickness: 1 mm – 10 mm typical
    • Format: Slit rolls, strips, die-cut pads
    Read moreDone

  • Hot Melt Double Sided Tissue Tape

    •  Common Size: 1020mm, 1040mm, 1240mm jumbo rolls; slit widths available
    •  Color: Translucent white tissue with yellow or white release paper
    •  Material: Non-woven tissue carrier with hot melt rubber PSA
    •  Thickness: Typical 80um-160um, adjusted by bonding surface
    •  Liner: Glassine paper or release paper for stable unwinding
    •  Applications: Packaging, paper converting, leather, footwear, foam lamination
    Read moreDone

  • Body side Moulding Tape

    • Common thickness: 0.8 mm, 1.1 mm, 1.5 mm, 2.0 mm
    • Color: Black or dark gray foam
    • Material: Acrylic foam with automotive PSA
    • Liner: Red PE film liner or release film
    • Tolerance: Width tolerance +/-0.3 mm typical
    • Use surface: Painted panels, ABS, PP molding backs
    Read moreDone

  • Double Sided PET Adhesive Tape

    • Carrier: Stable PET film carrier for clean converting
    • Adhesive: Pressure sensitive acrylic adhesive
    • Color: Clear, translucent, black, or custom backing
    • Thickness: 50 um, 80 um, 100 um, 125 um, 150 um, 205 um
    • Liner: Red MOPP film, glassine paper, or white release paper
    • Format: Jumbo roll, slit roll, log roll, kiss-cut, or die-cut parts
    Read moreDone

  • Double-Sided Tape Solutions for Signage Mounting and Outdoor Displays

    Double sided tape for signage can create a concealed bond line for sign panels, nameplates, acrylic displays, metal plates, and outdoor display assemblies. The key decision is not simply adhesive strength: surface type, coating condition, panel weight, bond area, temperature, humidity, sunlight exposure, application pressure, and dwell all affect the result. Foam mounting tape is often evaluated for rigid panels with minor surface mismatch, while thin film-carrier tape can suit flatter, low-profile parts. If clean removal or a sensitive finish matters, removal behavior must be part of the trial rather than assumed from the tape type. Critical outdoor or unfamiliar substrates should be sample-tested before full use.

    Read moreDone