No products were found matching your selection.

Other Related Products

  • Double Sided Foam Glazing Tape

    • Thickness: 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
    • Color: black, white, or project-specific option
    • Carrier: closed-cell PE foam
    • Adhesive: acrylic PSA on both sides
    • Liner: blue PE or PP release liner
    • Use: glass-to-frame bonding and glazing support
    Read moreDone

  • NBR Tape

    • Material: NBR/PVC rubber foam carrier
    • Adhesive: One-side pressure-sensitive adhesive
    • Structure: Foam backing with release liner
    • Colors: Black, gray, white
    • Thickness: 1 mm – 10 mm typical
    • Format: Slit rolls, strips, die-cut pads
    Read moreDone

  • Hot Melt Double Sided Tissue Tape

    •  Common Size: 1020mm, 1040mm, 1240mm jumbo rolls; slit widths available
    •  Color: Translucent white tissue with yellow or white release paper
    •  Material: Non-woven tissue carrier with hot melt rubber PSA
    •  Thickness: Typical 80um-160um, adjusted by bonding surface
    •  Liner: Glassine paper or release paper for stable unwinding
    •  Applications: Packaging, paper converting, leather, footwear, foam lamination
    Read moreDone

  • Closed Cell Polyethylene Foam Tape

    • Common thickness:1 mm – 10 mm
    • Color options:White, grey, black, custom
    • Foam material:Closed cell polyethylene foam
    • Adhesive side:Single-side PSA backing
    • Formats:Rolls, strips, sheets, die-cut gaskets
    • Typical use:HVAC, panels, frames, covers
    Read moreDone

  • EPDM Foam Rubber Density and Test Data

    EPDM foam rubber density is a controlled material measurement, not a stand-alone promise of sealing or cushioning performance. For cellular EPDM supplied as plain foam, slit strip, adhesive-backed tape, or converted gasket material, the value is meaningful only when specimen definition, thickness condition, cell structure, and conditioning are known. A typical range for current EPDM grades is 80-240 kg/m3. Final acceptance should use the tested grade and representative samples.0

    Read moreDone

  • Foam Tapes For HVAC

    • Common Sizes: 3 mm, 5 mm, 6 mm, 10 mm thickness
    • Color: Black, gray, or white
    • Material: PE, EPDM, NBR/PVC, or PU foam
    • Adhesive: Single-sided PSA with release liner
    • Roll Format: 10-100 mm width, 5-20 m length
    • Uses: Duct, flange, cabinet, and pipe insulation sealing
    Read moreDone

  • EPDM Sponge Rubber Tape

    • Material: Cellular EPDM sponge rubber
    • Cell structure: Closed-cell or semi-closed-cell
    • Color: Black typical
    • Thickness: 1 mm-20 mm typical
    • Density: 80-240 kg/m3 typical
    • Format: Rolls, slit strips, adhesive-backed tape, die-cut gaskets
    Read moreDone

  • Double-Sided Tape Solutions for Signage Mounting and Outdoor Displays

    Double sided tape for signage can create a concealed bond line for sign panels, nameplates, acrylic displays, metal plates, and outdoor display assemblies. The key decision is not simply adhesive strength: surface type, coating condition, panel weight, bond area, temperature, humidity, sunlight exposure, application pressure, and dwell all affect the result. Foam mounting tape is often evaluated for rigid panels with minor surface mismatch, while thin film-carrier tape can suit flatter, low-profile parts. If clean removal or a sensitive finish matters, removal behavior must be part of the trial rather than assumed from the tape type. Critical outdoor or unfamiliar substrates should be sample-tested before full use.

    Read moreDone

  • EVA Foam Grip Tape

    • Material: closed-cell EVA foam with textured grip surface
    • Color: black, gray, white, or custom production color
    • Thickness: 1 mm-10 mm typical, selected by contact pressure
    • Adhesive: acrylic PSA or rubber PSA backing
    • Liner: paper liner, glassine liner, or PET release film
    • Format: slit rolls, strips, sheets, kiss-cut pads, die cut shapes
    Read moreDone