No products were found matching your selection.
Other Related Products
-
Double sided tape for signage can create a concealed bond line for sign panels, nameplates, acrylic displays, metal plates, and outdoor display assemblies. The key decision is not simply adhesive strength: surface type, coating condition, panel weight, bond area, temperature, humidity, sunlight exposure, application pressure, and dwell all affect the result. Foam mounting tape is often evaluated for rigid panels with minor surface mismatch, while thin film-carrier tape can suit flatter, low-profile parts. If clean removal or a sensitive finish matters, removal behavior must be part of the trial rather than assumed from the tape type. Critical outdoor or unfamiliar substrates should be sample-tested before full use.
-
- Material: NBR/PVC rubber foam carrier
- Adhesive: One-side pressure-sensitive adhesive
- Structure: Foam backing with release liner
- Colors: Black, gray, white
- Thickness: 1 mm – 10 mm typical
- Format: Slit rolls, strips, die-cut pads
-
- Common thickness: 0.8 mm, 1.1 mm, 1.5 mm, 2.0 mm
- Color: Black or dark gray foam
- Material: Acrylic foam with automotive PSA
- Liner: Red PE film liner or release film
- Tolerance: Width tolerance +/-0.3 mm typical
- Use surface: Painted panels, ABS, PP molding backs
-
- Common Size: 15cm x 5m, 15cm x 10m
- Color: Green or dark green
- Backing: Non-woven fabric
- Adhesive: Pressure sensitive hot melt adhesive
- Liner: PE release liner or release paper
- Main Use: Small turf joining and quick repair
-
- Common Sizes: 3 mm, 5 mm, 6 mm, 10 mm thickness
- Color: Black, gray, or white
- Material: PE, EPDM, NBR/PVC, or PU foam
- Adhesive: Single-sided PSA with release liner
- Roll Format: 10-100 mm width, 5-20 m length
- Uses: Duct, flange, cabinet, and pipe insulation sealing
-
The tensile strength of mounting tape shows how a defined tape specimen resists pulling force before rupture under stated conditions. Read it with carrier construction, specimen direction, width, test speed, conditioning, and elongation. It is not a direct load-capacity rating and is not interchangeable with peel adhesion, shear holding power, or bonded-joint tensile strength. Grade-specific values and real assemblies should be confirmed by representative sample testing before full use.
-
- Material: closed-cell EVA foam with textured grip surface
- Color: black, gray, white, or custom production color
- Thickness: 1 mm-10 mm typical, selected by contact pressure
- Adhesive: acrylic PSA or rubber PSA backing
- Liner: paper liner, glassine liner, or PET release film
- Format: slit rolls, strips, sheets, kiss-cut pads, die cut shapes
-
- Common thickness: 2 mm, 3 mm, 5 mm, 8 mm, 10 mm
- Common width: 8 mm-50 mm, slit rolls or cut-to-length strips
- Color: black, white, grey, or custom color
- Material: soft PU foam rubber, 20-45 kg/m3 typical density
- Adhesive: plain strip or single-side acrylic PSA/rubber PSA
- Use: door, window, cabinet, and light equipment sealing
-
- Standard Size: 2 cm x 10 m roll, easy to handle
- Color: Transparent, blends discreetly with clothing
- Material: Hypoallergenic medical-grade adhesive
- Thickness: 0.15 mm (verified in factory quality checks)
- Sweat Resistance: Holds for up to 4 hours even under mild perspiration
- Application: Ideal for quick garment adjustments like necklines, sleeve edges, and dress slips
