No products were found matching your selection.

Other Related Products

  • Self Adhesive Tape For Artificial Grass

    • Common Size: 15cm x 5m, 15cm x 10m
    • Color: Green or dark green
    • Backing: Non-woven fabric
    • Adhesive: Pressure sensitive hot melt adhesive
    • Liner: PE release liner or release paper
    • Main Use: Small turf joining and quick repair
    Read moreDone

  • Foam Tapes For HVAC

    • Common Sizes: 3 mm, 5 mm, 6 mm, 10 mm thickness
    • Color: Black, gray, or white
    • Material: PE, EPDM, NBR/PVC, or PU foam
    • Adhesive: Single-sided PSA with release liner
    • Roll Format: 10-100 mm width, 5-20 m length
    • Uses: Duct, flange, cabinet, and pipe insulation sealing
    Read moreDone

  • Double-Sided Tape Solutions for Signage Mounting and Outdoor Displays

    Double sided tape for signage can create a concealed bond line for sign panels, nameplates, acrylic displays, metal plates, and outdoor display assemblies. The key decision is not simply adhesive strength: surface type, coating condition, panel weight, bond area, temperature, humidity, sunlight exposure, application pressure, and dwell all affect the result. Foam mounting tape is often evaluated for rigid panels with minor surface mismatch, while thin film-carrier tape can suit flatter, low-profile parts. If clean removal or a sensitive finish matters, removal behavior must be part of the trial rather than assumed from the tape type. Critical outdoor or unfamiliar substrates should be sample-tested before full use.

    Read moreDone

  • Double Sided Foam Glazing Tape

    • Thickness: 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
    • Color: black, white, or project-specific option
    • Carrier: closed-cell PE foam
    • Adhesive: acrylic PSA on both sides
    • Liner: blue PE or PP release liner
    • Use: glass-to-frame bonding and glazing support
    Read moreDone

  • Closed Cell Polyethylene Foam Tape

    • Common thickness:1 mm – 10 mm
    • Color options:White, grey, black, custom
    • Foam material:Closed cell polyethylene foam
    • Adhesive side:Single-side PSA backing
    • Formats:Rolls, strips, sheets, die-cut gaskets
    • Typical use:HVAC, panels, frames, covers
    Read moreDone

  • Tensile Strength of Mounting Tape – Technical Test Data

    The tensile strength of mounting tape shows how a defined tape specimen resists pulling force before rupture under stated conditions. Read it with carrier construction, specimen direction, width, test speed, conditioning, and elongation. It is not a direct load-capacity rating and is not interchangeable with peel adhesion, shear holding power, or bonded-joint tensile strength. Grade-specific values and real assemblies should be confirmed by representative sample testing before full use.

    Read moreDone

  • NBR Tape

    • Material: NBR/PVC rubber foam carrier
    • Adhesive: One-side pressure-sensitive adhesive
    • Structure: Foam backing with release liner
    • Colors: Black, gray, white
    • Thickness: 1 mm – 10 mm typical
    • Format: Slit rolls, strips, die-cut pads
    Read moreDone

  • Acrylic Foam Adhesive Tape

    • Common sizes: 6 mm-600 mm slit rolls, die-cut pads available
    • Color: Dark gray or black foam with red PE release liner
    • Material: Pressure-sensitive acrylic adhesive and acrylic foam core
    • Thickness options: 0.25 mm-3.0 mm for different bonding gaps
    • Liner: Red PE film, 100-140 um typical thickness
    • Applications: Industrial mounting, assembly, metal/plastic/glass bonding
    Read moreDone

  • Automotive Foam Gasket Tape

    • Common Thickness: 0.8 mm-6.0 mm, custom thickness available
    • Color: Black, grey, white, or project-specific color
    • Foam Material: PU, PE, EPDM, or blended automotive foam
    • Adhesive: Single-sided low odor acrylic PSA, 40-80 um typical
    • Format: Rolls, strips, kiss-cut parts, and die-cut foam gaskets
    • Main Use: Headlights, door panels, dashboards, speakers, HVAC vents, and NVH sealing
    Read moreDone