No products were found matching your selection.

Other Related Products

  • EVA Foam Grip Tape

    • Material: closed-cell EVA foam with textured grip surface
    • Color: black, gray, white, or custom production color
    • Thickness: 1 mm-10 mm typical, selected by contact pressure
    • Adhesive: acrylic PSA or rubber PSA backing
    • Liner: paper liner, glassine liner, or PET release film
    • Format: slit rolls, strips, sheets, kiss-cut pads, die cut shapes
    Read moreDone

  • Closed Cell Polyethylene Foam Tape

    • Common thickness:1 mm – 10 mm
    • Color options:White, grey, black, custom
    • Foam material:Closed cell polyethylene foam
    • Adhesive side:Single-side PSA backing
    • Formats:Rolls, strips, sheets, die-cut gaskets
    • Typical use:HVAC, panels, frames, covers
    Read moreDone

  • Self Adhesive Tape For Artificial Grass

    • Common Size: 15cm x 5m, 15cm x 10m
    • Color: Green or dark green
    • Backing: Non-woven fabric
    • Adhesive: Pressure sensitive hot melt adhesive
    • Liner: PE release liner or release paper
    • Main Use: Small turf joining and quick repair
    Read moreDone

  • Double Sided Foam Glazing Tape

    • Thickness: 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
    • Color: black, white, or project-specific option
    • Carrier: closed-cell PE foam
    • Adhesive: acrylic PSA on both sides
    • Liner: blue PE or PP release liner
    • Use: glass-to-frame bonding and glazing support
    Read moreDone

  • Heat Resistant Tape For Grill

    • Common Width: 25 mm, 38 mm, 50 mm
    • Roll Length: 10 m, 20 m, 30 m
    • Backing: Aluminum foil or glass cloth
    • Adhesive: Silicone pressure-sensitive adhesive
    • Color: Silver, black, gray
    • Use Area: Grill lid, door, seams
    Read moreDone

  • Double Sided PET Adhesive Tape

    • Carrier: Stable PET film carrier for clean converting
    • Adhesive: Pressure sensitive acrylic adhesive
    • Color: Clear, translucent, black, or custom backing
    • Thickness: 50 um, 80 um, 100 um, 125 um, 150 um, 205 um
    • Liner: Red MOPP film, glassine paper, or white release paper
    • Format: Jumbo roll, slit roll, log roll, kiss-cut, or die-cut parts
    Read moreDone

  • Tensile Strength of Mounting Tape – Technical Test Data

    The tensile strength of mounting tape shows how a defined tape specimen resists pulling force before rupture under stated conditions. Read it with carrier construction, specimen direction, width, test speed, conditioning, and elongation. It is not a direct load-capacity rating and is not interchangeable with peel adhesion, shear holding power, or bonded-joint tensile strength. Grade-specific values and real assemblies should be confirmed by representative sample testing before full use.

    Read moreDone

  • Carpet Tile Adhesive Tape

    • Common sizes: 50 mm, 75 mm, 100 mm; custom slit rolls
    • Color: Clear, white, or light amber
    • Structure: Thin film carrier with pressure-sensitive adhesive
    • Thickness: Low-profile 0.15 mm-0.35 mm options
    • Grades: Temporary grade and stronger holding grade
    • Use: Modular carpet tiles, offices, exhibitions, rental spaces
    Read moreDone

  • Double-Sided Tape Solutions for Signage Mounting and Outdoor Displays

    Double sided tape for signage can create a concealed bond line for sign panels, nameplates, acrylic displays, metal plates, and outdoor display assemblies. The key decision is not simply adhesive strength: surface type, coating condition, panel weight, bond area, temperature, humidity, sunlight exposure, application pressure, and dwell all affect the result. Foam mounting tape is often evaluated for rigid panels with minor surface mismatch, while thin film-carrier tape can suit flatter, low-profile parts. If clean removal or a sensitive finish matters, removal behavior must be part of the trial rather than assumed from the tape type. Critical outdoor or unfamiliar substrates should be sample-tested before full use.

    Read moreDone