No products were found matching your selection.
Other Related Products
-
- Common thickness: 2 mm, 3 mm, 5 mm, 8 mm, 10 mm
- Common width: 8 mm-50 mm, slit rolls or cut-to-length strips
- Color: black, white, grey, or custom color
- Material: soft PU foam rubber, 20-45 kg/m3 typical density
- Adhesive: plain strip or single-side acrylic PSA/rubber PSA
- Use: door, window, cabinet, and light equipment sealing
-
- Common Thickness: 0.8 mm-6.0 mm, custom thickness available
- Color: Black, grey, white, or project-specific color
- Foam Material: PU, PE, EPDM, or blended automotive foam
- Adhesive: Single-sided low odor acrylic PSA, 40-80 um typical
- Format: Rolls, strips, kiss-cut parts, and die-cut foam gaskets
- Main Use: Headlights, door panels, dashboards, speakers, HVAC vents, and NVH sealing
-
The tensile strength of mounting tape shows how a defined tape specimen resists pulling force before rupture under stated conditions. Read it with carrier construction, specimen direction, width, test speed, conditioning, and elongation. It is not a direct load-capacity rating and is not interchangeable with peel adhesion, shear holding power, or bonded-joint tensile strength. Grade-specific values and real assemblies should be confirmed by representative sample testing before full use.
-
- Common Width: 25 mm, 38 mm, 50 mm
- Roll Length: 10 m, 20 m, 30 m
- Backing: Aluminum foil or glass cloth
- Adhesive: Silicone pressure-sensitive adhesive
- Color: Silver, black, gray
- Use Area: Grill lid, door, seams
-
- Standard Size: 2 cm x 10 m roll, easy to handle
- Color: Transparent, blends discreetly with clothing
- Material: Hypoallergenic medical-grade adhesive
- Thickness: 0.15 mm (verified in factory quality checks)
- Sweat Resistance: Holds for up to 4 hours even under mild perspiration
- Application: Ideal for quick garment adjustments like necklines, sleeve edges, and dress slips
-
- Common thickness:1 mm – 10 mm
- Color options:White, grey, black, custom
- Foam material:Closed cell polyethylene foam
- Adhesive side:Single-side PSA backing
- Formats:Rolls, strips, sheets, die-cut gaskets
- Typical use:HVAC, panels, frames, covers
-
EPDM foam rubber density is a controlled material measurement, not a stand-alone promise of sealing or cushioning performance. For cellular EPDM supplied as plain foam, slit strip, adhesive-backed tape, or converted gasket material, the value is meaningful only when specimen definition, thickness condition, cell structure, and conditioning are known. A typical range for current EPDM grades is 80-240 kg/m3. Final acceptance should use the tested grade and representative samples.0
-
- Common size: 48mm x 25m, 50mm x 30m
- Color: white or light yellow
- Carrier: cloth or reinforced fabric
- Adhesive: pressure-sensitive rubber or acrylic
- Liner: easy-release paper liner
- Use: no-heat carpet fixing and joining
-
- Roll format: coated foam tape master roll for further processing.
- Common width: 1020 mm / 1240 mm jumbo roll options.
- Thickness range: 0.5 mm-5.0 mm typical.
- Foam density: 30-120 kg/m3, depending on carrier choice.
- Structure: single sided or double coated adhesive with liner.
- Uses: packaging pads, sealing strips, spacers, and converted foam parts.
