No products were found matching your selection.
Other Related Products
-
- Thickness: 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Color: black, white, or project-specific option
- Carrier: closed-cell PE foam
- Adhesive: acrylic PSA on both sides
- Liner: blue PE or PP release liner
- Use: glass-to-frame bonding and glazing support
-
- Material: Cellular EPDM sponge rubber
- Cell structure: Closed-cell or semi-closed-cell
- Color: Black typical
- Thickness: 1 mm-20 mm typical
- Density: 80-240 kg/m3 typical
- Format: Rolls, slit strips, adhesive-backed tape, die-cut gaskets
-
- Common thickness: 0.8 mm, 1.1 mm, 1.5 mm, 2.0 mm
- Color: Black or dark gray foam
- Material: Acrylic foam with automotive PSA
- Liner: Red PE film liner or release film
- Tolerance: Width tolerance +/-0.3 mm typical
- Use surface: Painted panels, ABS, PP molding backs
-
Double sided tape for signage can create a concealed bond line for sign panels, nameplates, acrylic displays, metal plates, and outdoor display assemblies. The key decision is not simply adhesive strength: surface type, coating condition, panel weight, bond area, temperature, humidity, sunlight exposure, application pressure, and dwell all affect the result. Foam mounting tape is often evaluated for rigid panels with minor surface mismatch, while thin film-carrier tape can suit flatter, low-profile parts. If clean removal or a sensitive finish matters, removal behavior must be part of the trial rather than assumed from the tape type. Critical outdoor or unfamiliar substrates should be sample-tested before full use.
-
- Common sizes: 6 mm-600 mm slit rolls, die-cut pads available
- Color: Dark gray or black foam with red PE release liner
- Material: Pressure-sensitive acrylic adhesive and acrylic foam core
- Thickness options: 0.25 mm-3.0 mm for different bonding gaps
- Liner: Red PE film, 100-140 um typical thickness
- Applications: Industrial mounting, assembly, metal/plastic/glass bonding
-
- Common thickness:1 mm – 10 mm
- Color options:White, grey, black, custom
- Foam material:Closed cell polyethylene foam
- Adhesive side:Single-side PSA backing
- Formats:Rolls, strips, sheets, die-cut gaskets
- Typical use:HVAC, panels, frames, covers
-
The tensile strength of mounting tape shows how a defined tape specimen resists pulling force before rupture under stated conditions. Read it with carrier construction, specimen direction, width, test speed, conditioning, and elongation. It is not a direct load-capacity rating and is not interchangeable with peel adhesion, shear holding power, or bonded-joint tensile strength. Grade-specific values and real assemblies should be confirmed by representative sample testing before full use.
-
EPDM foam rubber density is a controlled material measurement, not a stand-alone promise of sealing or cushioning performance. For cellular EPDM supplied as plain foam, slit strip, adhesive-backed tape, or converted gasket material, the value is meaningful only when specimen definition, thickness condition, cell structure, and conditioning are known. A typical range for current EPDM grades is 80-240 kg/m3. Final acceptance should use the tested grade and representative samples.0
-
- Carrier: Stable PET film carrier for clean converting
- Adhesive: Pressure sensitive acrylic adhesive
- Color: Clear, translucent, black, or custom backing
- Thickness: 50 um, 80 um, 100 um, 125 um, 150 um, 205 um
- Liner: Red MOPP film, glassine paper, or white release paper
- Format: Jumbo roll, slit roll, log roll, kiss-cut, or die-cut parts
