No products were found matching your selection.
Other Related Products
-


- Common Sizes: 3 mm, 5 mm, 6 mm, 10 mm thickness
- Color: Black, gray, or white
- Material: PE, EPDM, NBR/PVC, or PU foam
- Adhesive: Single-sided PSA with release liner
- Roll Format: 10-100 mm width, 5-20 m length
- Uses: Duct, flange, cabinet, and pipe insulation sealing
-


- Common Size: 15cm x 5m, 15cm x 10m
- Color: Green or dark green
- Backing: Non-woven fabric
- Adhesive: Pressure sensitive hot melt adhesive
- Liner: PE release liner or release paper
- Main Use: Small turf joining and quick repair
-

The tensile strength of mounting tape shows how a defined tape specimen resists pulling force before rupture under stated conditions. Read it with carrier construction, specimen direction, width, test speed, conditioning, and elongation. It is not a direct load-capacity rating and is not interchangeable with peel adhesion, shear holding power, or bonded-joint tensile strength. Grade-specific values and real assemblies should be confirmed by representative sample testing before full use.
-


- Common Thickness: 0.8 mm-6.0 mm, custom thickness available
- Color: Black, grey, white, or project-specific color
- Foam Material: PU, PE, EPDM, or blended automotive foam
- Adhesive: Single-sided low odor acrylic PSA, 40-80 um typical
- Format: Rolls, strips, kiss-cut parts, and die-cut foam gaskets
- Main Use: Headlights, door panels, dashboards, speakers, HVAC vents, and NVH sealing
-


- Material: Closed cell neoprene foam with pressure-sensitive adhesive
- Color: Standard black
- Thickness: Common 2 mm, 3 mm, 5 mm, 8 mm, 10 mm
- Width: Narrow slit rolls or wider sealing rolls
- Structure: Adhesive backed roll with removable release liner
- Use: HVAC panels, enclosure doors, equipment covers, outdoor cabinets
-


- Roll format: coated foam tape master roll for further processing.
- Common width: 1020 mm / 1240 mm jumbo roll options.
- Thickness range: 0.5 mm-5.0 mm typical.
- Foam density: 30-120 kg/m3, depending on carrier choice.
- Structure: single sided or double coated adhesive with liner.
- Uses: packaging pads, sealing strips, spacers, and converted foam parts.
-


- Carrier: Stable PET film carrier for clean converting
- Adhesive: Pressure sensitive acrylic adhesive
- Color: Clear, translucent, black, or custom backing
- Thickness: 50 um, 80 um, 100 um, 125 um, 150 um, 205 um
- Liner: Red MOPP film, glassine paper, or white release paper
- Format: Jumbo roll, slit roll, log roll, kiss-cut, or die-cut parts
-


- Common size: 48mm x 25m, 50mm x 30m
- Color: white or light yellow
- Carrier: cloth or reinforced fabric
- Adhesive: pressure-sensitive rubber or acrylic
- Liner: easy-release paper liner
- Use: no-heat carpet fixing and joining