No products were found matching your selection.

Other Related Products

  • Heat Resistant Tape For Grill

    • Common Width: 25 mm, 38 mm, 50 mm
    • Roll Length: 10 m, 20 m, 30 m
    • Backing: Aluminum foil or glass cloth
    • Adhesive: Silicone pressure-sensitive adhesive
    • Color: Silver, black, gray
    • Use Area: Grill lid, door, seams
    Read moreDone

  • EPDM Foam Rubber Density and Test Data

    EPDM foam rubber density is a controlled material measurement, not a stand-alone promise of sealing or cushioning performance. For cellular EPDM supplied as plain foam, slit strip, adhesive-backed tape, or converted gasket material, the value is meaningful only when specimen definition, thickness condition, cell structure, and conditioning are known. A typical range for current EPDM grades is 80-240 kg/m3. Final acceptance should use the tested grade and representative samples.0

    Read moreDone

  • Body side Moulding Tape

    • Common thickness: 0.8 mm, 1.1 mm, 1.5 mm, 2.0 mm
    • Color: Black or dark gray foam
    • Material: Acrylic foam with automotive PSA
    • Liner: Red PE film liner or release film
    • Tolerance: Width tolerance +/-0.3 mm typical
    • Use surface: Painted panels, ABS, PP molding backs
    Read moreDone

  • Closed Cell Polyethylene Foam Tape

    • Common thickness:1 mm – 10 mm
    • Color options:White, grey, black, custom
    • Foam material:Closed cell polyethylene foam
    • Adhesive side:Single-side PSA backing
    • Formats:Rolls, strips, sheets, die-cut gaskets
    • Typical use:HVAC, panels, frames, covers
    Read moreDone

  • Tensile Strength of Mounting Tape – Technical Test Data

    The tensile strength of mounting tape shows how a defined tape specimen resists pulling force before rupture under stated conditions. Read it with carrier construction, specimen direction, width, test speed, conditioning, and elongation. It is not a direct load-capacity rating and is not interchangeable with peel adhesion, shear holding power, or bonded-joint tensile strength. Grade-specific values and real assemblies should be confirmed by representative sample testing before full use.

    Read moreDone

  • Double Sided PET Tape Jumbo Roll

    •  Size: 1020 mm, 1240 mm, 1260 mm jumbo roll width available
    •  Color: clear / transparent adhesive layer
    •  Carrier: clear PET film with stable thickness control
    •  Adhesive: acrylic PSA coated on both sides
    •  Liner: red MOPP, PET liner, or yellow glassine liner
    •  Use: glass, acrylic, PC panels, nameplates, and clear parts
    Read moreDone

  • Double Sided PET Adhesive Tape

    • Carrier: Stable PET film carrier for clean converting
    • Adhesive: Pressure sensitive acrylic adhesive
    • Color: Clear, translucent, black, or custom backing
    • Thickness: 50 um, 80 um, 100 um, 125 um, 150 um, 205 um
    • Liner: Red MOPP film, glassine paper, or white release paper
    • Format: Jumbo roll, slit roll, log roll, kiss-cut, or die-cut parts
    Read moreDone

  • Jumbo Roll Foam Adhesive Tape

    • Roll format: coated foam tape master roll for further processing.
    • Common width: 1020 mm / 1240 mm jumbo roll options.
    • Thickness range: 0.5 mm-5.0 mm typical.
    • Foam density: 30-120 kg/m3, depending on carrier choice.
    • Structure: single sided or double coated adhesive with liner.
    • Uses: packaging pads, sealing strips, spacers, and converted foam parts.
    Read moreDone

  • EPDM Sponge Rubber Tape

    • Material: Cellular EPDM sponge rubber
    • Cell structure: Closed-cell or semi-closed-cell
    • Color: Black typical
    • Thickness: 1 mm-20 mm typical
    • Density: 80-240 kg/m3 typical
    • Format: Rolls, slit strips, adhesive-backed tape, die-cut gaskets
    Read moreDone