No products were found matching your selection.
Other Related Products
-
- Carrier: Stable PET film carrier for clean converting
- Adhesive: Pressure sensitive acrylic adhesive
- Color: Clear, translucent, black, or custom backing
- Thickness: 50 um, 80 um, 100 um, 125 um, 150 um, 205 um
- Liner: Red MOPP film, glassine paper, or white release paper
- Format: Jumbo roll, slit roll, log roll, kiss-cut, or die-cut parts
-
EPDM foam rubber density is a controlled material measurement, not a stand-alone promise of sealing or cushioning performance. For cellular EPDM supplied as plain foam, slit strip, adhesive-backed tape, or converted gasket material, the value is meaningful only when specimen definition, thickness condition, cell structure, and conditioning are known. A typical range for current EPDM grades is 80-240 kg/m3. Final acceptance should use the tested grade and representative samples.0
-
- Common Size: 1020mm, 1040mm, 1240mm jumbo rolls; slit widths available
- Color: Translucent white tissue with yellow or white release paper
- Material: Non-woven tissue carrier with hot melt rubber PSA
- Thickness: Typical 80um-160um, adjusted by bonding surface
- Liner: Glassine paper or release paper for stable unwinding
- Applications: Packaging, paper converting, leather, footwear, foam lamination
-
- Thickness: 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Color: black, white, or project-specific option
- Carrier: closed-cell PE foam
- Adhesive: acrylic PSA on both sides
- Liner: blue PE or PP release liner
- Use: glass-to-frame bonding and glazing support
-
- Common size: 48mm x 25m, 50mm x 30m
- Color: white or light yellow
- Carrier: cloth or reinforced fabric
- Adhesive: pressure-sensitive rubber or acrylic
- Liner: easy-release paper liner
- Use: no-heat carpet fixing and joining
-
- Common Size: 15cm x 5m, 15cm x 10m
- Color: Green or dark green
- Backing: Non-woven fabric
- Adhesive: Pressure sensitive hot melt adhesive
- Liner: PE release liner or release paper
- Main Use: Small turf joining and quick repair
-
- Material: NBR/PVC rubber foam carrier
- Adhesive: One-side pressure-sensitive adhesive
- Structure: Foam backing with release liner
- Colors: Black, gray, white
- Thickness: 1 mm – 10 mm typical
- Format: Slit rolls, strips, die-cut pads
-
- Common thickness: 2 mm, 3 mm, 5 mm, 8 mm, 10 mm
- Common width: 8 mm-50 mm, slit rolls or cut-to-length strips
- Color: black, white, grey, or custom color
- Material: soft PU foam rubber, 20-45 kg/m3 typical density
- Adhesive: plain strip or single-side acrylic PSA/rubber PSA
- Use: door, window, cabinet, and light equipment sealing
-
Double sided tape for signage can create a concealed bond line for sign panels, nameplates, acrylic displays, metal plates, and outdoor display assemblies. The key decision is not simply adhesive strength: surface type, coating condition, panel weight, bond area, temperature, humidity, sunlight exposure, application pressure, and dwell all affect the result. Foam mounting tape is often evaluated for rigid panels with minor surface mismatch, while thin film-carrier tape can suit flatter, low-profile parts. If clean removal or a sensitive finish matters, removal behavior must be part of the trial rather than assumed from the tape type. Critical outdoor or unfamiliar substrates should be sample-tested before full use.
