No products were found matching your selection.
Other Related Products
-


- Material: closed-cell EVA foam with textured grip surface
- Color: black, gray, white, or custom production color
- Thickness: 1 mm-10 mm typical, selected by contact pressure
- Adhesive: acrylic PSA or rubber PSA backing
- Liner: paper liner, glassine liner, or PET release film
- Format: slit rolls, strips, sheets, kiss-cut pads, die cut shapes
-


- Common Size: 1020mm, 1040mm, 1240mm jumbo rolls; slit widths available
- Color: Translucent white tissue with yellow or white release paper
- Material: Non-woven tissue carrier with hot melt rubber PSA
- Thickness: Typical 80um-160um, adjusted by bonding surface
- Liner: Glassine paper or release paper for stable unwinding
- Applications: Packaging, paper converting, leather, footwear, foam lamination
-


- Common sizes: 50 mm, 75 mm, 100 mm; custom slit rolls
- Color: Clear, white, or light amber
- Structure: Thin film carrier with pressure-sensitive adhesive
- Thickness: Low-profile 0.15 mm-0.35 mm options
- Grades: Temporary grade and stronger holding grade
- Use: Modular carpet tiles, offices, exhibitions, rental spaces
-


- Material: NBR/PVC rubber foam carrier
- Adhesive: One-side pressure-sensitive adhesive
- Structure: Foam backing with release liner
- Colors: Black, gray, white
- Thickness: 1 mm – 10 mm typical
- Format: Slit rolls, strips, die-cut pads
-


- Material: Closed cell neoprene foam with pressure-sensitive adhesive
- Color: Standard black
- Thickness: Common 2 mm, 3 mm, 5 mm, 8 mm, 10 mm
- Width: Narrow slit rolls or wider sealing rolls
- Structure: Adhesive backed roll with removable release liner
- Use: HVAC panels, enclosure doors, equipment covers, outdoor cabinets
-

EPDM foam rubber density is a controlled material measurement, not a stand-alone promise of sealing or cushioning performance. For cellular EPDM supplied as plain foam, slit strip, adhesive-backed tape, or converted gasket material, the value is meaningful only when specimen definition, thickness condition, cell structure, and conditioning are known. A typical range for current EPDM grades is 80-240 kg/m3. Final acceptance should use the tested grade and representative samples.0
-

The tensile strength of mounting tape shows how a defined tape specimen resists pulling force before rupture under stated conditions. Read it with carrier construction, specimen direction, width, test speed, conditioning, and elongation. It is not a direct load-capacity rating and is not interchangeable with peel adhesion, shear holding power, or bonded-joint tensile strength. Grade-specific values and real assemblies should be confirmed by representative sample testing before full use.
-


- Common thickness:1 mm – 10 mm
- Color options:White, grey, black, custom
- Foam material:Closed cell polyethylene foam
- Adhesive side:Single-side PSA backing
- Formats:Rolls, strips, sheets, die-cut gaskets
- Typical use:HVAC, panels, frames, covers