No products were found matching your selection.
Other Related Products
-
The tensile strength of mounting tape shows how a defined tape specimen resists pulling force before rupture under stated conditions. Read it with carrier construction, specimen direction, width, test speed, conditioning, and elongation. It is not a direct load-capacity rating and is not interchangeable with peel adhesion, shear holding power, or bonded-joint tensile strength. Grade-specific values and real assemblies should be confirmed by representative sample testing before full use.
-
- Thickness: 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
- Color: black, white, or project-specific option
- Carrier: closed-cell PE foam
- Adhesive: acrylic PSA on both sides
- Liner: blue PE or PP release liner
- Use: glass-to-frame bonding and glazing support
-
- Material: Closed cell neoprene foam with pressure-sensitive adhesive
- Color: Standard black
- Thickness: Common 2 mm, 3 mm, 5 mm, 8 mm, 10 mm
- Width: Narrow slit rolls or wider sealing rolls
- Structure: Adhesive backed roll with removable release liner
- Use: HVAC panels, enclosure doors, equipment covers, outdoor cabinets
-
- Standard Size: 2 cm x 10 m roll, easy to handle
- Color: Transparent, blends discreetly with clothing
- Material: Hypoallergenic medical-grade adhesive
- Thickness: 0.15 mm (verified in factory quality checks)
- Sweat Resistance: Holds for up to 4 hours even under mild perspiration
- Application: Ideal for quick garment adjustments like necklines, sleeve edges, and dress slips
-
EPDM foam rubber density is a controlled material measurement, not a stand-alone promise of sealing or cushioning performance. For cellular EPDM supplied as plain foam, slit strip, adhesive-backed tape, or converted gasket material, the value is meaningful only when specimen definition, thickness condition, cell structure, and conditioning are known. A typical range for current EPDM grades is 80-240 kg/m3. Final acceptance should use the tested grade and representative samples.0
-
- Material: NBR/PVC rubber foam carrier
- Adhesive: One-side pressure-sensitive adhesive
- Structure: Foam backing with release liner
- Colors: Black, gray, white
- Thickness: 1 mm – 10 mm typical
- Format: Slit rolls, strips, die-cut pads
-
- Common Size: 15cm x 5m, 15cm x 10m
- Color: Green or dark green
- Backing: Non-woven fabric
- Adhesive: Pressure sensitive hot melt adhesive
- Liner: PE release liner or release paper
- Main Use: Small turf joining and quick repair
-
- Common Size: 1020mm, 1040mm, 1240mm jumbo rolls; slit widths available
- Color: Translucent white tissue with yellow or white release paper
- Material: Non-woven tissue carrier with hot melt rubber PSA
- Thickness: Typical 80um-160um, adjusted by bonding surface
- Liner: Glassine paper or release paper for stable unwinding
- Applications: Packaging, paper converting, leather, footwear, foam lamination
-
Double sided tape for signage can create a concealed bond line for sign panels, nameplates, acrylic displays, metal plates, and outdoor display assemblies. The key decision is not simply adhesive strength: surface type, coating condition, panel weight, bond area, temperature, humidity, sunlight exposure, application pressure, and dwell all affect the result. Foam mounting tape is often evaluated for rigid panels with minor surface mismatch, while thin film-carrier tape can suit flatter, low-profile parts. If clean removal or a sensitive finish matters, removal behavior must be part of the trial rather than assumed from the tape type. Critical outdoor or unfamiliar substrates should be sample-tested before full use.
