No products were found matching your selection.
Other Related Products
-
- Roll format: coated foam tape master roll for further processing.
- Common width: 1020 mm / 1240 mm jumbo roll options.
- Thickness range: 0.5 mm-5.0 mm typical.
- Foam density: 30-120 kg/m3, depending on carrier choice.
- Structure: single sided or double coated adhesive with liner.
- Uses: packaging pads, sealing strips, spacers, and converted foam parts.
-
- Material: Closed cell neoprene foam with pressure-sensitive adhesive
- Color: Standard black
- Thickness: Common 2 mm, 3 mm, 5 mm, 8 mm, 10 mm
- Width: Narrow slit rolls or wider sealing rolls
- Structure: Adhesive backed roll with removable release liner
- Use: HVAC panels, enclosure doors, equipment covers, outdoor cabinets
-
- Material: Cellular EPDM sponge rubber
- Cell structure: Closed-cell or semi-closed-cell
- Color: Black typical
- Thickness: 1 mm-20 mm typical
- Density: 80-240 kg/m3 typical
- Format: Rolls, slit strips, adhesive-backed tape, die-cut gaskets
-
EPDM foam rubber density is a controlled material measurement, not a stand-alone promise of sealing or cushioning performance. For cellular EPDM supplied as plain foam, slit strip, adhesive-backed tape, or converted gasket material, the value is meaningful only when specimen definition, thickness condition, cell structure, and conditioning are known. A typical range for current EPDM grades is 80-240 kg/m3. Final acceptance should use the tested grade and representative samples.0
-
The tensile strength of mounting tape shows how a defined tape specimen resists pulling force before rupture under stated conditions. Read it with carrier construction, specimen direction, width, test speed, conditioning, and elongation. It is not a direct load-capacity rating and is not interchangeable with peel adhesion, shear holding power, or bonded-joint tensile strength. Grade-specific values and real assemblies should be confirmed by representative sample testing before full use.
-
- Common Sizes: 3 mm, 5 mm, 6 mm, 10 mm thickness
- Color: Black, gray, or white
- Material: PE, EPDM, NBR/PVC, or PU foam
- Adhesive: Single-sided PSA with release liner
- Roll Format: 10-100 mm width, 5-20 m length
- Uses: Duct, flange, cabinet, and pipe insulation sealing
-
- Carrier: Stable PET film carrier for clean converting
- Adhesive: Pressure sensitive acrylic adhesive
- Color: Clear, translucent, black, or custom backing
- Thickness: 50 um, 80 um, 100 um, 125 um, 150 um, 205 um
- Liner: Red MOPP film, glassine paper, or white release paper
- Format: Jumbo roll, slit roll, log roll, kiss-cut, or die-cut parts
-
- Regular Size: 20mm, 30mm, 50mm width
- Color: Clear transparent
- Material: PU gel or acrylic gel
- Thickness: 0.5mm-3.0mm
- Supply Form: Roll, strip, pad, sheet
- Custom Option: OEM die-cut shape
